Should i use algaecide in my pool

If your water has been struck by Algae, we have developed an efficient solution that will take only 4 days to fix! Please see below for an in-depth description of what you need to do.

First, remove the automatic pool cleaner from your pool water. This is an important step because algae thrives in high pH environments therefore, neutralizing your pH is vital to successfully treating your algae problem. If your pool water is no longer green, this next step is for you.

If your pool water is still green, wait 24 hours and then redo the steps from Day 1. In the morning, add Oxidizer to your pool water. This is a good thing! The change in your pool water colour means that you have successfully eliminated the algae and can now clean it out of your pool.

If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2. Now is the time to add Pool Clarifier and let it circulate for 12 hours. This will clump the algae together into vaccumable pieces. Shut your pump off and let the cloudiness settle. This may take up to a few days for very cloudy pools. All the algae should be dead and sitting at the bottom of your pool at this point.

The dead algae is likely too fine to be vacuumed through your sand filter, therefore owners of sand filters must vacuum on the waste setting.

Also, one of the side effects is that the algaecide stops working as it should, it becomes ineffective. What should you do if you add too much algaecide to your pool?

The only option is to wait until it naturally dissolves over time. Evaporation and backwashing will help with it. If you cannot wait for the product to disappear, you can always drain some of the water and add fresh water to dilute the algaecide. If you add too much algaecide, foam appears, but note that it will dissipate over time.

The algaecide will slowly fade due to chlorine , so you can shock the pool with higher chlorine levels to speed up the process. Swimming while using algaecide directly depends on which product was used. There are two main types of algaecides — long-lived and regular. They are added once at the beginning of the swimming season, they usually contain copper and are often safe to swim immediately after treatment. However, if you add a large dose of this algaecide and go swimming right away, your hair may turn green or blue , or it may irritate your eyes and skin.

These algaecides, unlike the long-lived ones, are added to the water every couple of weeks. They do not contain copper, but quaternary ammonium compounds. Although the algaecides that are used for most pools are low in concentration so that you can swim right away, it is advisable to wait a few minutes to an hour. If you use algaecide step by step correctly, as well as calculate the correct dose for your pool and not overdo it, you can consider it a safe product for your health.

You can even swim with it, but remember that it is always better to wait for a little while before immediately swimming. Otherwise, feel free to use algaecide as your main weapon against algae and enjoy a crystal clear pool all year round! While shocking and adding algaecide is effective in getting rid of algae, it should not be done together.

When you mix chlorine and algaecide, it renders both of them useless. You should first shock the pool and wait for the chlorine level to become normal ppm , and then add an algaecide. Algaecide should be added to your pool water every week. Preventing algae is the main purpose of using an algaecide: it kills algae, but it is better to use it as a preventive measure against starting algae and growing in the pool.

Algaecide should be added after every shock treatment. Yes , if you miscalculate the amount of algaecide, you can overdo it. You can always drain some of the water and add fresh water to dilute the algaecide. Swimming while using algaecide directly depends on which product was used — long-lived or regular algaecide.

Long-lived usually contain copper and are often safe to swim immediately after treatment. However, if you add a large dose and go swimming right away, your hair may turn green or blue. Regular ones do not contain copper, but quaternary ammonium compounds.

Shock your water on a routine basis with an Pool Season oxidizer and put the comfort back in your pool water. A clean filter, pristine tile surfaces and the clearest water will all contribute to your overall pool enjoyment. With Pool Season accessory products, you can achieve your best pool environment. Pool Season accessories are the finishing touch to quality pool care. Ask your Pool Season pool care professional how.

It is important to shock your pool every 1 - 2 weeks on a regular basis. Shocking the pool on a regular basis is an important element in keeping your pool clear and clean. Swimmers and environment add waste to the pool that must be eliminated on a regular basis in order to prevent problems such as algae and cloudy water.

Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool.

Algaecide should be added after every shock treatment. Testing your pool times a week is important to maintain adequate water balance and sanitizer levels plus to insure swimmer comfort.

Test strips are a quick 30 second means to test the pool for adequate sanitizer levels as well as pH and total alkalinity.